QtVlm autopilot VLM : Différence entre versions

De VlmWiki
 
(10 révisions intermédiaires par le même utilisateur non affichées)
Ligne 24 : Ligne 24 :
 
5- Validate. This will send instructions to VLM's autopilot
 
5- Validate. This will send instructions to VLM's autopilot
  
 +
== '''Autopilot sends Waypoints to the VLM Server''' ==
 +
 +
[[Image:QtVlm-Boat-AutoPilot-WP-s.png]]
 +
 +
 +
== '''Autopilot''' ==
 +
 +
* The Autopilot can receive up to six waypoints from the Routes > Autopilot Tab.
 +
* The command sequence is ''Select the Route > Right Click > Pick Edit > Route Tab > Check VBVMG''
 +
* Then go to ''Autopilot Tab > Load Auto > Send''  which uploads the WP to the VLM server.
 +
* Additional WP's can be added from the ''Boat > Autopilot''  window.
 +
* The autopilot will execute the waypoints dependent on the Pilot mode, current grib and boat polar.
 +
* When the last waypoint is reached several things can happen dependent on what has been entered into the last waypoint Position and Next heading.  See below.
 +
 +
== '''''Boat > Autopilot  >  Autopilot Instructions''''' Window ==
 +
 +
'''Pilot Mode'''
 +
* 1. Constant Heading  -  Steers on a constant bearing (West = 270°). on a rumb-line course.
 +
* 2. Constant Wind Heading - Steers on a constant wind heading on a variable course determined by grib.
 +
* 3. Orthodromic Pilot - Uses a great-circle which is the shortest distance between any two points.
 +
* 4. Best VMG -  The bearing that results in the fastest approaching speed to the goal using the current wind.
 +
* 5. Very Best VMG - Integrates a tack to the goal and minimize the duration.
 +
 +
'''Heading / Angle'''  - Usually Greyed out with '0.0'  (not used).  Pilot Mode -Constant Heading uses this.
 +
 +
'''Position'''
 +
* Latitude          If '0' the next WP is the race's next closest gate, and there are no intermediate WP.
 +
* Longitude        If '0' the next WP is the race's next closest gate, and there are no intermediate WP.
 +
 +
'''Next Heading'''  - Usually this angle is entered when doing Route > Autopilot Tab > Load Auto > Send
 +
 +
* If there is a "Heading-to-follow-after-WP" entered, then the boat will be set in heading mode with this value.  -- Nice, but if the wind happens to come from that direction, you might not move a lot...
 +
 +
* If there is not such value defined (i.e. it has been set to "-1"), then the boat will keep the same navigation mode (VBVMG, VMG or ORTHO) as the one it had before reaching the WP, and will use that mode toward the closest point of the next race gate. --Nice again, but if there is land between the boat and the next gate that might create problems.
 +
 +
* Note: A WP is considered as 'reached' in VLM when the distance between the boat and the WP is less than or equal to the distance the boat sailed during the previous crank (vacation). So in fact the WP is always reached *before* the boat hits it.
 +
 +
'''Copy Instruction''',  P'''aste Instruction''',  '''Select Mark'''  allows a convenient way to pick a WP fro
 +
 +
-----
 +
 +
== '''''Boat > Autopilot''''' ==
 +
 +
To Check or Edit WP uploaded to the Autopilot on the VLM Server.
 +
The best way to check and modify what instructions have been sent from a Route to the Autopilot server, is to use
 +
''Boat > Autopilot''  which will show the list of waypoints  on the server that the VLM engine uses to calculate the boats progress.  "Edit All" button on the WP you'd like to check.  All parameters can be changed..
  
  

Version actuelle datée du 23 janvier 2013 à 01:28

Back

You can program VLM's autopilot

  • Through the menu 'Route>Edit a route' and send POIs to autopilot more help
  • Directly through Autopilot function:

1- Select "Boat > Autopilot" buttons. This will open a new dialog:

Pilototo1.png

2- Click on the '+' button:

3- Click on the drop box 'Constant Heading':

  • If you choose 'Constant Heading' or 'Constant Wind Angle' you have to enter an angle in the next field.
  • If you choose 'Ortho' 'Best VMG' or 'VBVMG',
    • you can capture coordinates directly in the next field, or
    • you can click on the WP button and choose a POI directly on the map

4- Enter the date at which the instruction sould be executed. Pilototo4.png


5- Validate. This will send instructions to VLM's autopilot

Autopilot sends Waypoints to the VLM Server

QtVlm-Boat-AutoPilot-WP-s.png


Autopilot

  • The Autopilot can receive up to six waypoints from the Routes > Autopilot Tab.
  • The command sequence is Select the Route > Right Click > Pick Edit > Route Tab > Check VBVMG
  • Then go to Autopilot Tab > Load Auto > Send which uploads the WP to the VLM server.
  • Additional WP's can be added from the Boat > Autopilot window.
  • The autopilot will execute the waypoints dependent on the Pilot mode, current grib and boat polar.
  • When the last waypoint is reached several things can happen dependent on what has been entered into the last waypoint Position and Next heading. See below.

Boat > Autopilot > Autopilot Instructions Window

Pilot Mode

  • 1. Constant Heading - Steers on a constant bearing (West = 270°). on a rumb-line course.
  • 2. Constant Wind Heading - Steers on a constant wind heading on a variable course determined by grib.
  • 3. Orthodromic Pilot - Uses a great-circle which is the shortest distance between any two points.
  • 4. Best VMG - The bearing that results in the fastest approaching speed to the goal using the current wind.
  • 5. Very Best VMG - Integrates a tack to the goal and minimize the duration.

Heading / Angle - Usually Greyed out with '0.0' (not used). Pilot Mode -Constant Heading uses this.

Position

  • Latitude If '0' the next WP is the race's next closest gate, and there are no intermediate WP.
  • Longitude If '0' the next WP is the race's next closest gate, and there are no intermediate WP.

Next Heading - Usually this angle is entered when doing Route > Autopilot Tab > Load Auto > Send

  • If there is a "Heading-to-follow-after-WP" entered, then the boat will be set in heading mode with this value. -- Nice, but if the wind happens to come from that direction, you might not move a lot...
  • If there is not such value defined (i.e. it has been set to "-1"), then the boat will keep the same navigation mode (VBVMG, VMG or ORTHO) as the one it had before reaching the WP, and will use that mode toward the closest point of the next race gate. --Nice again, but if there is land between the boat and the next gate that might create problems.
  • Note: A WP is considered as 'reached' in VLM when the distance between the boat and the WP is less than or equal to the distance the boat sailed during the previous crank (vacation). So in fact the WP is always reached *before* the boat hits it.

Copy Instruction, Paste Instruction, Select Mark allows a convenient way to pick a WP fro


Boat > Autopilot

To Check or Edit WP uploaded to the Autopilot on the VLM Server. The best way to check and modify what instructions have been sent from a Route to the Autopilot server, is to use Boat > Autopilot which will show the list of waypoints on the server that the VLM engine uses to calculate the boats progress. "Edit All" button on the WP you'd like to check. All parameters can be changed..




Back